Blocked sewer pipes can easily turn into severe plumbing issues. Although working on blocked pipes may not be easy, there are many available approaches you can consider. If your first try fails, then you have a lot of other workarounds to try. When you are working on this problem, follow the step-by-step procedure below:
Step 1. Assess the damage
First things first. Inspect the area to identify the severity of the problem. This will make the variation when trying to remove whatever is obstructing the water to flow directly on sewer. Identify the area where sewage is leaking.
Step 2. Work on a simple clog
A simple clog only calls for a simple repair. A household plunger or liquid draining cleaner is most of the time what you need to free up the pipe. If you are planning to use a plunger for your blocked sewer pipes, you have to work on it with strong force or motion going up and down in the fastest manner possible.
You need to do the entire process more than once to have it take effect. You can use liquid draining cleaner, follow instructions provided by the manufacturer and give it ample time to work. Using chemicals may be needed several times a year to keep your system from clogging.
Step 3. Remove larger clog
If the clog is larger, you may need to check sewer pipes outside your home and use a snake. Most of the time, the pipe is colour white and has a hole in the middle that is sticking out of the ground. You can either use automatic or manual sewer snake and let it run in the middle hole.
Work it as far as you reach the clog. In case that the sewer snake is not possible to reach the obstruction, you may need to dig up your pipes and replace them. Most of the time, too complex work as such should be performed by professional blocked sewer pipe Sydney. Doing it yourself may not cure the issue yet worsen it.